originAl 5183
originAl 5183 is an AlMg wire rod with consistent quality through a continuous wire casting.
- Magnesium (Mg) is the main alloy component in this group
Standardization and composition
| EN ISO 18273 | S Al 5183 (AlMg4.5Mn0.7) |
|---|---|
| DIN 1732 | 3.3548 |
| AWS A5.10 | ER 5183 |
| Si | < 0.40 |
| Fe | < 0.40 |
| Cu | < 0.10 |
| Mn | 0.50 - 1.00 |
| Mg | 4.30 - 5.20 |
| Cr | 0.05 - 0.25 |
| Zn | < 0.25 |
| Zr | - |
| Ti | < 0.15 |
| Al | Balance |
| Be | < 0.0003 |
| Others | < 0.15 |
Physical properties
| Density (g/cm³) | 2.66 |
|---|---|
| Melting range (°C) | 574 - 638 |
| Yield strength (MPa) | ≥ 130 |
| Tensile strength (MPa) | ≥ 275 |
| Elongation (%) | ≥ 18 |
Delivery options
| Make-up | Weight/Length | Dimension |
|---|---|---|
| Coil | 1,5 - 1,7 t | 6mm |
Berkenhoff GmbH (headquarters)
- Kinzenbach plant
- Berkenhoffstrasse 14
- 35452 Heuchelheim
- Germany
- +49 641 601 0
- +49 641 601 222
- info(at)bedra.com
Berkenhoff GmbH
- Merkenbach plant
- Rehmühle 1
- 35745 Herborn
- Germany
- +49 2772 5002 0
- +49 2772 5002 155
- info(at)bedra.com
bedra Vietnam Alloy Material Co., Ltd
- Lot CN-06, Hoa Phu Industrial Park,
Mai Dinh Commune,
Hiep Hoa District, Bắc Ninh Province,
Vietnam
- +84 2043900104
- +84 2043900110
- info-asia(at)bedra.com
Do you have a question about our products?
Use our wire configurator!
English 
Deutsch 
Tiếng Việt 
中文