bedra63000
Aluminum Bronze
Characteristics:
This alloy is a copper-aluminum-iron-nickel quaternary alloy, hardened by aluminum solid solution strengthening. It exhibits high strength and wear resistance. Additionally, due to the formation of a dense aluminum oxide protective layer on its surface, the alloy demonstrates excellent high-temperature corrosion and oxidation resistance, as well as corrosion resistance in atmospheric, freshwater, and seawater environments. It can be welded and performs well in hot pressure processing.
Typical applications:
It is commonly used in high-strength screws, nuts, copper sleeves, sealing rings, and related hardware components.
Standardization and composition
| UNS | C63000 |
|---|---|
| EN | / |
| JIS | / |
| GB | C63000 (QAl10-5-3) |
| Cu | balance |
| Al | 9.0-11.0% |
| Fe | 2.0-4.0% |
| Ni | 4.0-5.0% |
| Mn | ≤ 1.5% |
| Sn | ≤ 0.2% |
| Si | ≤ 0.25% |
| Zn | ≤ 0.3% |
| Others | ≤ 0.5% |
Physical properties①
Note①：The testing temperature is 20℃. Note②：The testing temperature range is 20℃ to 300℃.
| Density (g/cm³) | 7.58 |
|---|---|
| Electrical conductivity (%IACS) | 7 |
| Thermal conductivity (W / m x K) | 38 |
| Coefficient of linear mean expansion② (10-6/K) | 16.2 |
| Modulus of elasticity (GPa) | 121 |
Fabrication Properties
Note③：C37700 = 100% Note④：C36000 = 100%
| Capacity for being cold worked | Poor |
| Capacity for being hot formed | Good |
| Brazing | Fair |
| Resistance welding | Good |
| Forgeability rating ③ | 75% |
| Machinability rating ④ | 30% |
Mechanical Properties
| Temper | Diameter (mm) | Tensile Strength (MPa min.) | Yield Strength (MPa min.) | Elongation (% min.) |
|---|---|---|---|---|
| HR50 | 12≤Φ≤25 | 690 | 345 | 5 |
| HR50 | 25＜Φ≤50 | 620 | 310 | 6 |
| HR50 | 50＜Φ≤100 | 585 | 295 | 10 |
Dimension Tolerance and Delivery Form
Note⑤：The tolerances listed in the table are specified as all plus or all minus. When tolerances are specified as plus and minus (±), half the values given.
| Straight bar | ||||
| Diameter (mm) | Tolerance⑤ (mm) | Ovality (mm) | Length (mm. max.) | Straightness (mm/m max.) |
| 8 ≤ Φ ≤ 10 | 0.12 | 0.06 | 4000 | 1.0 |
| 10 ＜ Φ ≤ 18 | 0.16 | 0.08 | 4000 | 1.0 |
| 18 ＜ Φ ≤ 50 | 0.20 | 0.10 | 4000 | 1.0 |
| 50 ＜ Φ ≤ 60 | 0.30 | 0.15 | 4000 | 1.0 |
| 60 ＜ Φ ≤ 70 | 0.30 | 0.15 | 4000 | 3.0 |
| 70 ＜ Φ ≤ 90 | 1.20 | 0.60 | 3000 | 3.0 |
| 80 ＜ Φ ≤ 120 | 2.00 | 0.80 | 2000 | 5.0 |
Further product information
PDF Datasheet | EN PDF Datasheet | VI PDF Datasheet | ZH
Please contact us
Sales Asia-Pacific (Excluding-India)
Sales India
Sales North America
Berkenhoff GmbH (headquarters)
- Kinzenbach plant
- Berkenhoffstrasse 14
- 35452 Heuchelheim
- Germany
- +49 641 601 0
- +49 641 601 222
- info(at)bedra.com
Berkenhoff GmbH
- Merkenbach plant
- Rehmühle 1
- 35745 Herborn
- Germany
- +49 2772 5002 0
- +49 2772 5002 155
- info(at)bedra.com
bedra Vietnam Alloy Material Co., Ltd
- Lot CN-06, Hoa Phu Industrial Park,
Mai Dinh Commune,
Hiep Hoa District, Bắc Ninh Province,
Vietnam
- +84 2043900104
- +84 2043900110
- info-asia(at)bedra.com
Close
Search
English 
Deutsch 
Tiếng Việt