C3601
Leaded Brass
Similar Material Designation
| UNS | C36000 |
| EN | CuZn36Pb3 (CW603N) |
| JIS | C3601 |
| GB | C36000 (HPb62-3) |
Chemical Composition
| Cu | 59.0-63.0% |
| Pb | 1.8-3.7% |
| Fe | ≤0.3% |
| Sn+Fe | ≤0.5% |
| Ni | ≤0.2% |
| As | ≤0.02% |
| Zn | Balance% |
Physical properties①
Note①：The testing temperature is 20℃. Note②：The testing temperature range is 20℃ to 300℃.
| Density (g/cm³) | 8.5 |
|---|---|
| Metling point(℃) | 899 |
| Electrical conductivity (%IACS) | 22 |
| Thermal conductivity (W / m x K) | 106 |
| Coefficient of thermal expansion② (10-6/K) | 19.7 |
| Modulus of elasticity (GPa) | 96.5 |
Fabrication Properties
Note③：C36000 = 100%
| Machinability rating ③ | 90% |
| Polishing | Poor |
| Hot forging | Poor |
| Clamping | Good |
| Thread rolling | Fair |
| Tapping | Fair |
Mechanical Properties④
Note③：bedra technical standards
| Temper | Diameter(mm) | Tensile Strength(MPa min.) | Yield Strength(MPa min.) | Elongation(A% min.) |
|---|---|---|---|---|
| H04 | 1.5 ≤ Φ < 3.0 | 520 | 380 | 1 |
| H04 | 3.0 ≤ Φ < 8.0 | 490 | 350 | 4 |
| H04 | 8.0 ≤ Φ < 15 | 420 | 310 | 10 |
| H04 | 15 ≤ Φ < 35 | 390 | 300 | 18 |
| H04 | 35 ≤ Φ < 60 | 320 | 250 | 24 |
| H02 | 1.5 ≤ Φ < 3.0 | 360 | 280 | 7 |
| H02 | 3.0 ≤ Φ < 8.0 | 340 | 250 | 14 |
| H02 | 8.0 ≤ Φ < 15 | 340 | 230 | 20 |
| H02 | 15 ≤ Φ < 35 | 320 | 200 | 25 |
| H02 | 35 ≤ Φ < 60 | 300 | 180 | 30 |
| M30 | - | 300 | 180 | 25 |
| O60 | - | 250 | 150 | 30 |
Dimension&Tolerance of Round Bars
Note⑤: The tolerances listed in the table are specified as all plus or minus. When tolerances are specified as plus and minus(±)，half the values given.
| Diameter(mm) | Tolerance⑤(mm) | Tolerance consistency(mm) | Ovality max.(mm) | Straightness max.(mm/m) | Length max.(mm) |
|---|---|---|---|---|---|
| 1.5 ≤ Φ < 3.0 | 0.02 | 0.01 | 0.01 | 0.15 | 2500 |
| 3.0 ≤ Φ < 10 | 0.04 | 0.02 | 0.02 | 0.15 | 4000 |
| 10 ≤ Φ < 25 | 0.08 | 0.04 | 0.04 | 0.25 | 4000 |
| 25 ≤ Φ < 50 | 0.12 | 0.06 | 0.06 | 0.35 | 4000 |
| 50 ≤ Φ < 60 | 0.20 | 0.10 | 0.10 | 0.50 | 4000 |
Dimension&Tolerance of Hexagonal/Square Bars
Note⑥: "a" is the cross distance of square bars, and "s" is the cross distance of hexagonal bars edge distance;Note⑦: The tolerances listed in the table are specified as all plus or all minus. When tolerances are specified as plus and minus(±), take the v
| Diameter⑥(mm) | Tolerance⑦(mm) | Tolerance consistency(mm) | Torsion max.(mm/m) | Chamfer Radius min.(mm) | Straightness max.(mm/m) | Length max.(mm) |
|---|---|---|---|---|---|---|
| 2.0 ≤ a/s < 6.0 | 0.04 | 0.02 | 0.3 | 0.2 | 0.20 | 4000 |
| 6.0 ≤ a/s < 10 | 0.05 | 0.025 | 0.3 | 0.2 | 0.25 | 4000 |
| 10 ≤ a/s < 20 | 0.12 | 0.06 | 0.5 | 0.5 | 0.50 | 4000 |
| 20 ≤ a/s < 30 | 0.18 | 0.09 | 0.5 | 0.5 | 0.50 | 4000 |
| 30 ≤ a/s < 42 | 0.36 | 0.18 | 0.5 | 1.0 | 0.75 | 4000 |
Dimension&Tolerance of Round Wires
Note⑧: The tolerances listed in the table are specified as all plus or all minus. When tolerances are specified as plus and minus(±), take the values given.
| Diameter(mm) | Tolerance⑧(mm) | Tolerance consistency(mm) | Ovality max.(mm) | ID(mm) | Weight(kg) |
|---|---|---|---|---|---|
| 0.5 ≤ Φ < 1.7 | 0.02 | 0.01 | 0.01 | 270-300 | 20-35 |
| 1.7 ≤ Φ < 8.0 | 0.04 | 0.02 | 0.020 | 380-540 | 25-300 |
| 8.0 ≤ Φ < 14 | 0.08 | 0.04 | 0.040 | 950-1050 | 200-800 |
Dimension&Tolerance of Hexagonal/Square Wires
Note⑨: "a" is the cross distance of square bars, and "s" is the cross distance of hexagonal bars edge distance;Note⑩: The tolerances listed in the table are specified as all plus or all minus. When tolerances are specified as plus and minus(±), take the v
| Diameter⑨(mm) | Tolerance⑩(mm) | Tolerance consistency(mm) | Chamfer Radius min.(mm) | ID(mm) | Weight(kg) |
|---|---|---|---|---|---|
| 1.5 ≤ a/s < 2.5 | 0.03 | 0.015 | 0.2 | 380-440 | 20-35 |
| 2.5 ≤ a/s < 10 | 0.04 | 0.02 | 0.2 | 500-540 | 25-300 |
| 10 ≤ a/s < 17 | 0.08 | 0.04 | 0.5 | 950-1050 | 200-800 |
Other Delivery Forms
Tubes, Profiles
Further product information
PDF Datasheet | EN PDF Datasheet | VI PDF Datasheet | ZH
Please contact us
Sales Asia-Pacific (Excluding-India)
Sales India
Sales North America
Berkenhoff GmbH (headquarters)
- Kinzenbach plant
- Berkenhoffstrasse 14
- 35452 Heuchelheim
- Germany
- +49 641 601 0
- +49 641 601 222
- info(at)bedra.com
Berkenhoff GmbH
- Merkenbach plant
- Rehmühle 1
- 35745 Herborn
- Germany
- +49 2772 5002 0
- +49 2772 5002 155
- info(at)bedra.com
bedra Vietnam Alloy Material Co., Ltd
- Lot CN-06, Hoa Phu Industrial Park,
Mai Dinh Commune,
Hiep Hoa District, Bắc Ninh Province,
Vietnam
- +84 2043900104
- +84 2043900110
- info-asia(at)bedra.com
Close
Search
English 
Deutsch 
Tiếng Việt