originAl 5554
originAl 5554 is an AlMg wire rod with consistent quality through a continous wire casting.
Standardization and composition
| EN ISO 18273 | S Al 5554 (AlMg2.7Mn) |
|---|---|
| DIN 1723 | 3.3538 |
| AWS A5.10 | ER/R 5183 |
| Si | < 0.25 |
| Fe | < 0.40 |
| Cu | < 0.10 |
| Mn | 0.50-1.0 |
| Mg | 2.4-3.0 |
| Cr | 0.05-0.25 |
| Zn | < 0.25 |
| Zr | - |
| Ti | 0.05-0.20 |
| Al | Balance |
| Be | < 0.0003 |
| Others | < 0.15 |
Physical properties
| Density (g/cm³) | 2.68 |
|---|---|
| Melting range (°C) | 602-648 |
| Yield strength (MPa) | ≥ 100 |
| Tensile strength (MPa) | ≥ 215 |
| Elongation (%) | ≥ 18 |
Delivery options
| Make-up | Weight/Length | Dimension |
|---|---|---|
| Coil | 1.5-1.7t | 6mm |
Further product information
Berkenhoff GmbH (headquarters)
- Kinzenbach plant
- Berkenhoffstrasse 14
- 35452 Heuchelheim
- Germany
- +49 641 601 0
- +49 641 601 222
- info(at)bedra.com
Berkenhoff GmbH
- Merkenbach plant
- Rehmühle 1
- 35745 Herborn
- Germany
- +49 2772 5002 0
- +49 2772 5002 155
- info(at)bedra.com
Do you have a question about our products?
Use our wire configurator!
