originAl M4043
originAl 4043 is an AlSi wire rod with consistent quality through a continous wire casting.
Standardization and composition
| EN ISO 18273 | S Al 4043A(AlSi5(A)) |
|---|---|
| DIN 1732 | 3.2245 |
| AWS A5.10 | ER 4043 |
| Si | 4.5 - 6.0 |
| Fe | <0.6 |
| Cu | <0.30 |
| Mn | <0.15 |
| Mg | <0.05 |
| Cr | - |
| Zn | <0.10 |
| Zr | - |
| Ti | <0.15 |
| Al | Balance |
| Be | <0.0003 |
| Others | <0.15 |
Physical properties
| Density (g/cm³) | 2.68 |
|---|---|
| Melting range (°C) | 573 - 625 |
| Yield strength (MPa) | ≥ 40 |
| Tensile strength (MPa) | ≥ 120 |
| Elongation (%) | ≥ 8 |
Delivery options
| Make-up | Weight/Length | Dimension |
|---|---|---|
| Coil | 1.5-1.7to | 6mm |
Further product information
Berkenhoff GmbH (headquarters)
- Kinzenbach plant
- Berkenhoffstrasse 14
- 35452 Heuchelheim
- Germany
- +49 641 601 0
- +49 641 601 222
- info(at)bedra.com
Berkenhoff GmbH
- Merkenbach plant
- Rehmühle 1
- 35745 Herborn
- Germany
- +49 2772 5002 0
- +49 2772 5002 155
- info(at)bedra.com
Do you have a question about our products?
Use our wire configurator!
